A4 Heat Transfer Paper (DARK) | Waterproof, Inkjet | NA-P-INK-HEATTRANSFER-D

Iron-On Instructions - Dark

1. Preheat the Iron: Use a stable, heat resistant surface, set to 170-180°C.
2. Print and Cut: Print the design normally (no mirroring). Let it dry, then cut out the image.
3. Position the Design: Peel off the adhesive polyester film from the backing and place it on the fabric image facing up.
4. Pressing: Lay a greaseproof sheet over the design. Apply medium to high pressure, moving the iron in slow circular motions for 60-70 seconds, ensuring even heat distribution.
5. Peeling: Wait a few seconds, then remove the greaseproof paper.

Heat Press Instructions - Dark

1. Preheat the Press: Set to 165-175°C.
2. Smooth the Fabric: Press the fabric down for 5 seconds.
3. Print and Cut: Print the design normally (no mirroring). Let it dry, then cut the image.
4. Position the Design: Peel off the adhesive polyester film from the backing and place it on the fabric image facing up.
5. Pressing: Lay a greaseproof sheet over the design. Apply medium to high pressure for 25-35 seconds.
6. Wait 15 seconds, then peel off the greaseproof paper.

Please refer to the images for full instructions.